Sponsors

free counters

Thursday, May 20, 2010

N82 light solution


BlackBerry Master Control Program v0.9.2.0 Beta 10 Released!


Darren let me know that he has updated his BlackBerry Master Control Program (MCP) to version 0.9.2.0 Beta 10.

MCP is a must have application for moderate to advanced BlackBerry users that allows you upgrade or downgrade your OS, load/save/erase modules, take screenshots, perform Java Loader commands, reset to factory defaults and so much more! What makes MCP awesome besides for all its features is that it comes in a portable version that you can install on a portable memory device (like a USB drive), allowing you to plug it in for use on any compatible PC.


Here are some info and download links for each version:

Samsung l 760 mic solution

N97 not charging solution

problem 1: charging or USB without response. (switch off the phone)

problem 2: nokia logo only but the battery bar not moving. (switch off the phone)

Thursday, May 13, 2010

Local mode final solution for BB5 cables converter Scenarios




This post is based on following special cable interface.
Quote:
Here the schematics of the add-on box..

It solves:
a) BSI problem (add the value of 2,7 or 5.1 to the actual resistor inside the cable)
b) Low power problem (using a standard usb charger you can give up to 1 ampere to the mobile ) important when you have not a self powered usb hub or you are using a laptop.

Valid solution as well (Using an UFC cable connecting only GND and VPP to the battery connector) to give power to the mobile during an USB flash.

Comments on the Project

The LOW power problem is the biggest working on mobiles like 6300, 6500, 5800, N95 or N96 where most boxes or usb ports fail to give the proper current to the mobile in restarting it and the job goes in error.
As well those mobile are the cause of problem on the boxes stressing over limit the power regulator ic.
For who thinks a 10 K resistor needs to be added I think is useless considering all the commercial cables, today, have at least 5.1 Kohm BSI value.. so 0, 2.7 and 5.1 are enough but this small project is free to be modified.

Mega Antina Switch





FREE DCT4 Plus RSA UNLOCKER v0.2.0

FREE DCT4 Plus RSA UNLOCKER v0.2.0
* Free DCT4++ RSA all models unlock
* Can repair any damages in Simlock area on ANY DCT4 ASIC 11 based phone and upload Simlock RPL part (SLData), even on empty boards
* You do not need any LOGS, CREDITS, ACTIVATIONS or box except UFS/JAF interface
* To unlock DCT4++ phones please use Unlock button
* Do not need to worry about firmware and UPP version
* No more patch files
* Phones are really unlocked
* You can use both FBUS and Easy Cable
* Safe software (this software does not kill any other devices)
* Working with JAF interface (also with dead boxes KILLED BY MX-KEY update)
Working with UFS interface
* Calculation is server based and take about 1 second per phone and is totally free for all
* Relock option comming soon
What’s new ?
- Supported JAF Firmware 01B4 (if you face any problem with unlock error check cable[] etc. push and keep power On button on the phone and then click Info/Unlock)
- Major bugs fixed
Supported NOKIA models:
1110i, 1112b, 1200, 1202, 1208, 1208b, 1209, 1600b, 1661, 1662, 1650, 1680 Classic, 1680 Classic-2b, 2220 Slide, 2310, 2320 Classic, 2320 Classic-2b, 2323 CLassic, 2330 Classic, 2600, 2600a, 2610, 2610b, 2626, 2630, 2630b, 2660, 2660b, 2680 Slide, 2720 Fold, 2760, 2760b, 2760h, 5000, 5030 XM, 6030b, 7070 Prism, 7100 Supernova
PLEASE use only this location to download the software. In other case please verify exe file hash:
SHA-1: B357D7ED8EDBA218E2B0A1E9848021C095AF7D82
MD-5: 288350DECD28BFB82401049D4328950B


B.R
dct4plus.com


TX-RX-GND PINOUT USING RJ45 and DKU-2(China Phones)


JAF and Ufs Interphase for Rj45...
TX-RX-GND PINOUT USING RJ45 and DKU-2
it was very useful for using spiderman crack!






Wednesday, May 12, 2010

Nokia n96 solution





New china battery low shutdown 100% solution



NOKIA 2690 SOLUTION AIO




Light Solution For 1661,1202

2600c,2630 new camera solution

2630 phone it water damage problem was camera not

supported & than restart.I clean full bord,change camera but not solve.

Finaly i remove n3301 camera regulet ic & make jumper like this & problem

solve & camera working again.

So i thing it share of my all frends.

Nokia 6303 hardware solutions








Nokia 1650 Complete Hardware Repair Solution




Nokia 1650 Sim ways

Nokia 1650 buzzer ways

Nokia 1650 Display jumpers

Nokia 1650 ear phone repair

Nokia 1650 jumper repair

Nokia 1650 vibra repair

Nokia 1650 local mode solution

Nokia 1650 Light jumpers

Nokia 1650 charging repair solution

Nokia 1650 keypad jumper

Nokia 1650 signal problem

Nokia 1650 radio problem solution



Nokia 5800 All Solution



Nokia 5800 Solution:
Bluetooth
Charge
LCD
MIC
Ring
SIM

Tuesday, May 11, 2010

Sprint 7700 Full solution_100%



china pinout in one shell



Nokia n86 all solution




Nokia 3120c solution pictures




Seimens Hardware And Testpoints Repair Guide



Schematics_benq_siemens







E52 charging solution 100% tested



its shorted...

i change pearl ic or power ic same problem

i tryied to search here but no solution
this is your solution

Nokia 2680s hang & restart solution

Nokia 3110c,6300,C3500 Heasset not detected







Stay Connected